One Stop Electrical Reference Centre

Find out more about bridge rectifiers.

For most alternative energy applications, we require a direct current (DC) voltage to be generated - for example to charge a bank of batteries. However wind turbines and wave power generators create an alternating current (AC) voltage.

This is where the Bridge Rectifier comes in. The AC voltage generated is passed through a circuit of four diodes arranged as shown below and emerged converted into a more useful DC output.

Diodes allow electricity to flow in only one direction, but there is a small voltage lost across the a diode of 0.7V called the forward voltage drop.

If the diode is wired in the wrong direction then no current (actually a very tiny current) flows across the diode. However, if the voltage is too high and goes over the diode's maximum reverse voltage, the diode will breakdown and fail.